top of page
Maxtech PU1814  Car Body Sheet Metal Modified polyether sealant 

∎Description

●PU1814 is one component room temperature moisture curing modified polyether sealant, with excellent sealing performance and excellent cohesion, no corrosive to the substrate to adhere, no pollution to the environment, good adhesion to metal and other substrates.

Sealing and bonding of ventilation ducts, gutters and spouts etc. Sealing of sheet metal seams; For vibration reduction in all type of sheet metal assembly works

​

∎Key Features

​

 

●Primerless

●Excellent thixotropy, non-sag properties

●Excellent adhesion and wear-resisting property

●Cold application

●One-component formulation

●Excellent extrudability, easy for raked joint operation

●Solvent-free, environmental protection

●Paintable and polishable

 

∎Areas of Application

​

● Mainly used for welding seam and sealing of automobile, railway passenger cars, ships, cold storage container, van body of the refitted vehicle, etc.

● Waterproof, dustproof sealing of refrigerated container, construction and pipe.

● For vehicle sheet metal repairing, aluminum gusset and bodywork sealing.

● The body of sheet metal, weld, box seal, roof, machinery, air-conditioning fan groove joints and other parts of the bonding and sealing; most of the plastic parts (such as ABS, PVC) bonding and sealing.

PU WINDSHIELD ADHESIVE
High Grade Windshield Polyurethane Sealant
PU Windshield Adhesive (Automotive)
High-strength adhesive and sealant systems for fast installation and repair of commercial vehicle gl
Polyurethane adhesive for windshield applications
PU WINDSHIELD ADHESIVE
MaxtechPU1731 Polyurethane Sealant For Windshield
Auto Glass PU Sealant Manufacturer
Polyurethane Windshield Sealant and Glass Primerless
Polyurethane adhesive for windshield
PU Sealant Auto body seam sealing
Vehicle adhesives and sealants
Car Body Panel Joint & Seam Sealer Catridge
VEHICLE BODY SEALANT
Car body PU sealant
Polyurethane automotive glass adhesive sealant
Glass, Car body and Windshield Adhesives
Adhesives & Seam Sealers
Car Body Seam Sealing
Car body sealant

∎Technical Data Table

 

PERPORTY                                                                                                    VALUE

Chemical base                                                                                          1-C polyurethane

Colour (Appearance)                                                                                  White

Cure mechanism                                                                                         Moisture curing

Density (g/cm³) (GB/T 13477.2)                                                                1.3±0.05g/cm³ approx.

Non-sag properties(GB/T 13477.6)                                                            Very good

Application temperature                                                                               5°C to 35ºC

Tack-free time1 (GB/T 13477.5)                                                                  20~60mins

Curing speed (HG/T 4363)                                                                           see diagram

Shore A hardness (GB/T 531.1)                                                                   40±5 approx.

Tensile strength (GB/T 528)                                                                          3.5N/mm2 approx.

Elongation at break (GB/T 528 )                                                                    ≥350%

Extrudadbility (ml/min)                                                                                 >100

Tensile-shear strength(MPa)GB/T 7124                                                        3.0 N/mm2  approx.

Volatile content                                                                                                ＜4%

Service temperature                                                                                        30min @180°C , long time @ -40~80 °C

Shelf life (storage below 25°C) (CQP 016-1)                                                   9 months

∎Direction for use

 

Tool: Manual or pneumatic plunger caulking gun

●Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.

●For cartridge

1.Cut nozzle to give the required angle and bead size

2.Pierce the membrane at the top of the cartridge and screw on the nozzle

3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength

●For sausage

1.Clip the end of the sausage and place in barrel gun

2.Screw end cap and nozzle on to barrel gun

3.Using the trigger extrude the sealant with equal strength

●Apply Maxtech PU Sealant

 For Automotive Car Windscreen/Windshield in a continuous bead using constant pressure to apply the sealant

​

∎Attention of operation
Wear suitable protective clothing, gloves, and eye/face protection. After contact with skin, wash immediately with plenty of water and soap. In case of an accident or if you feel unwell, seek medical advice immediately.

​

This is professional auto glass glue, it is high viscosity ( thick ) , so a caulking gun will be required to apply the glue. If you using a regular ( not a professional ) caulking gun to apply the glue, please make sure to warm the glue up by using the hair dryer for 15 mins . Please do not stock it in cold place so the glue will freeze and very hard to apply.

∎Packing & Delivery
Wear suitable protective clothing, gloves, and eye/face protection. After contact with skin, wash immediately with plenty of water and soap. In case of an accident or if you feel unwell, seek medical advice immediately.

​

​

∎Pallet Packing :

310ml tube: One pallet can bear 56 CTNS, 2240pcs. One 20ft Can bear 10 pallets.

600ml Sausage: One pallet can bear 42 CTNS, 1680pcs. One 20ft Can bear 10 pallets.

 

∎Delivery time :

Normally order, the delivery time is around 10-15days.

Samples: 2-3days.

 

∎Transport &Storage
* Transport: Keep the sealed product away from moisture, the sun, high temperature and avoid collisions.
* Storage: Keep the sealed product in a cool, dry place.
* Storage temperature: 5~25℃. Humidity: ≤50%RH.
* Cartridge and Sausage:9 months. Pail/Drum:6 month.

bottom of page