Maxtech PU1630F   2-3 hours Safety Drive Away High viscosity odorless Fast Cure Auto Glass Urethane Windshield Sealant Glue

∎Description

●PU1630F is a Primerless, high viscosity, Odorless one- component direct glazing adhesive. It is easy to apply with a manual or automatic gun and cures with atmospheric moisture.

PU1630F provides a fast tack-free time and ensures a safe strength after curing even under cold temperature. We formulated this adhesive with high viscosity for accurate placement and high bond strength to meet a variety of application strength requirements. This urethane adhesive is ideal for those applications that require a fast cure and stronghold, such as windshield bonding, Bus glass bonding, trucks glass bonding and so on.

​

∎Key Features

●High Viscosity

●No DOP

●Primerless

●Odorless

●Excellent thixotropy, non-sag properties

●Fast adhesion to substrates

●Cold application

●One-component formulation

●Automotive OEM quality

●No oil permeated

●Safe drive away time in as little as 2 hours when used on vehicles with airbag

●Modest hardness after curing

●Flexible, durable and excellent extrudability​​

●No sagging, no pollution and corrosion to base material and environment

●Excellent sealing performance, excellent water and aging resistance

●High bond strength is capable of meeting many application strength requirements

​

∎Areas of Application

​

● PU1630F is suitable for direct-glazing applications in the Heavy Automotive Glass Replacement business & Bus Glass Changing

● This product is to be used by professional experienced users only. If this product is used for other applications than Automotive Glass Replacement, test with current substrates and conditions have to be performed to ensure adhesion and material compatibility, also can be used to  bond and seal vehicle windshields, backlights and sidelights

​

● Bonding of the front, rear and side screens to the body of automotive vehicles such as passenger cars, trucks, tractors and special vehicles.

∎Technical Data Table

PERPORTY                                                                                                    VALUE

Chemical base                                                                                          1-C polyurethane

Colour (Appearance)                                                                                  Black

Cure mechanism                                                                                         Moisture curing

Density (g/cm³) (GB/T 13477.2)                                                                1.45g/cm³ approx.

Non-sag properties(GB/T 13477.6)                                                            Very good

Application temperature                                                                               5°C to 35ºC

Tack-free time1 (GB/T 13477.5)                                                                  30mins

Curing speed (HG/T 4363)                                                                           see diagram

Shore A hardness (GB/T 531.1)                                                                   50~60 approx.

Tensile strength (GB/T 528)                                                                         6 N/mm2 approx.

Elongation at break (GB/T 528 )                                                                    ≥400%

Tear propagation resistance (GB/T 529)                                                        ≥8.0N/mm

Extrudadbility (ml/min)                                                                                  40

Tensile-shear strength(MPa)GB/T 7124                                                        3.5 N/mm2  approx.

Safe Drive-Away Time1 (cars) with double side airbags                                2 hours

Service temperature                                                                                        -40°C to 90ºC

Shelf life (storage below 25°C) (CQP 016-1)                                                   9 months

∎Direction for use

Tool: Manual or pneumatic plunger caulking gun

●Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.

●For cartridge

1.Cut nozzle to give the required angle and bead size

2.Pierce the membrane at the top of the cartridge and screw on the nozzle

3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength

●For sausage

1.Clip the end of the sausage and place in barrel gun

2.Screw end cap and nozzle on to barrel gun

3.Using the trigger extrude the sealant with equal strength

●Apply Maxtech PU Sealant

 For Automotive Car Windscreen/Windshield in a continuous bead using constant pressure to apply the sealant

1.Obtain a new windshield.
2.Remove the plastic surround side and top moldings correctly.
3.Cut the urethane from the outside between the glass and the pinch weld.
4.Apply a windshield primer to the frit band.
5.Apply the urethane with an electric caulking gun.
6.Lift the windshield into place.
7.Push the window down around the frame to guarantee a tight bond.
8.Allow the urethane to dry.

​

∎Attention of operation
Wear suitable protective clothing, gloves, and eye/face protection. After contact with skin, wash immediately with plenty of water and soap. In case of an accident or if you feel unwell, seek medical advice immediately.

∎Packing & Delivery
Wear suitable protective clothing, gloves, and eye/face protection. After contact with skin, wash immediately with plenty of water and soap. In case of an accident or if you feel unwell, seek medical advice immediately.

​

​